21
About viewing trails
Note
: Available for all GPS-based activities: Run/Cycle/Freestyle (Runner3 and Spark3) and Trail
running/Hiking (TomTom Adventurer)
To view a trail while doing an activity, do the following :
1.
Start an activity that uses a trail, for example, trail running.
2.
To see your trail, press
RIGHT
and then press
UP
from the Heart Rate Zone screen.
Tip
: If a trail has been pre-selected, you see it automatically.
You see the full trail displayed as a thin line. You also see the start of the activity marked by a
home icon, the start of trail marked by a flag and the end of the trail marked by a finish line
icon.
Your position is show by the arrow. The arrow tells you which direction you are facing when
standing still and which direction you are headed when moving. A thicker line shows your
breadcrumb trail, displaying where you have been.
3.
To zoom in, press
RIGHT
to go to a zoomed-in view of your trail and press
LEFT
to zoom back
out.
Route Exploration
