manualshive.com logo in svg

TomTom 4PL50, User Manual, Page: 21 / 177

Share
Download
TomTom 4PL50 User Manual Download Page 21

21 

 
 

 

4.

 

Instruction panel. This panel shows the following information: 

 

The direction of your next turn. 

 

The distance to your next turn. 

 

The name of the next road on your route. 

 

Lane guidance at some intersections. 

5.

 

Route symbols. Symbols are used on your route to show your starting location, your 

stops

, 

and your destination. 

6.

 

Main Menu button. Select the button to show the Main Menu. 

7.

 

Speed panel. This panel shows the following information: 

 

The speed limit at your location. 

 

Your current speed. If you drive more than 3 mph (5  km/h) over the speed limit the speed 
panel turns red. If you drive less than 3 mph (5  km/h) over the speed limit the speed panel 
turns orange. 

 

The name of the street you are driving on. 

 

Green speed advice for the optimal speed to save fuel. 

Note: Green speed advice only available if your TomTom PRO is connected to a TomTom 
LINK 5xx/4xx device that is connected to a TomTom ecoPLUS/LINK 105. 

8.

 

Current location. This symbol shows your current location. Select the symbol or the speed 
panel to open the 

quick menu

. 

Note: If your PRO cannot find your location the symbol appears gray. 

9.

 

Route bar. The route bar is shown when you have planned a route. 

Important: To see a wider route bar showing additional route information, change the setting 
for 

Route Information

.   

 

The WEBFLEET panel 

The WEBFLEET panel is shown when you are using the WEBFLEET fleet management solution. It 
shows the following. 

 

Summary of Contents for 4PL50


















































































































































































Reviews:

No comments