7(16)
1.4 Alarm:
The water sensor indicates water
•
Indication of water from the water sensor or wireless water detector.
The ball valves close automatically, and the control unit sets to the OFF
position. The ALARM LED flashes, and the buzzer pulsates.
•
Resolve the leak and confirm the alarm by pressing OFF. As long as one
of the water sensors is wet, the system will turn off again.
1.5 Faults:
•
Low battery voltage.
If the battery voltage gets too low in any of the battery-powered units, it will
beep in a way similar to a smoke alarm.
During normal use, the batteries have a life expectancy of at least 2 years.
• Radio communication errors
If the radio communication between different devices stops working, or does
not work satisfactorily, this is usually because something has changed in the
home since the radio communication last worked. Something new has been
introduced that interferes with the transmission; tin cans under the sink
that block the signal is the most common problem, but new wires or electric
equipment within 30 cm from one of the radio units could also be the cause.
1.6 External Control:
See instructions or manual for these devices. Note that the keystroke / control
signals override the previous ones. Connect according to the description in
section 2.4.
