Toledo ZT-1, User Manual, Page: 8 / 36

ZT-1 User’s Manual – Installation
DOC #18172 Page 8
Specifications
Transducers Full bridge, 120 to 1000 ohms.
Sensor Excitation Built in +10VDC at 250mA max.
Balance Range +/- 1mV/V of sensor imbalance
Gain Ranges Low range = x50 to x550 adjustable
High range = x500 to x5,500 adjustable
Calibration Shunt Built-in 1 mega ohm (.1%), or external custom shunt.
Output Range - Voltage Normal Peak and Reverse Peak = 0 to 10VDC
Track output = -10 to +10VDC
Output Range - Current Normal Peak and Reverse Peak = 0 to 20mA
Track output = -20 to +20mA
Circuit Inaccuracy +/- .1% of full scale max.
Circuit Non-linearity +/- .02% of full scale max.
Auto Zero Time constant = 10 seconds. DIP switch selectable.
Frequency Response DC to 5,000 Hz
Speed Limit 2000 SPM max. when triggered by External Probe
500 SPM max. when triggered by Internal Threshold
Operating Temperature -4 to 158 degree F, or -20 to 70 degree C
Display LED bar-graph voltmeter for setup and diagnostic
Trigger Internal Threshold (.35V / .70V), or External Probe.
Probe Input NPN/PNP proximity probes, solid state or dry contact
relays. Built-in 24VDC at 80mA max. supplies power to the
probe.
Input Power 24VDC at 300mA max. Automatic resettable fuse.
Dimensions 0.9” W x 4.1” H x 4.7” D
Mounting Standard DIN Rail mount