Toledo ZT-1, User Manual

Page: 6 / 36

ZT-1 User’s Manual – Installation
DOC #18172 Page 6
Features Overview
The ZT-1 tonnage load module is designed for critical force measurement applications
where accuracy, extreme stability, and dependable noise rejection is essential. It is
equipped with an LED bar-graph voltmeter for easy setup and diagnostic. The ZT-1 is
DIN rail mountable and is designed to interface with a PLC analog card and to display
output through a human machine interface (HMI).
•
Designed to work with strain gage sensors and load cells. The ZT-1 can also
accept input from 4-20mA current output sensors or voltage output sensors.
•
Simultaneously provides normal peak, reverse peak, and track voltage outputs.
Also simultaneously provides the associated 0-20mA current outputs.
•
Built-in threshold trigger simplifies installation. External probe trigger can also be
used when situation required.
•
LED bar-graph voltmeter for easy setup and diagnostic.
•
Built-in 1 Mega Ohm calibration shunt resistor. User selected external shunt
resistor can be used for load cell applications.
•
x1 and x10 amplifier gain ranges to work with either strong or weak signal from
the load sensor.
•
Auto-Zero can be selected using dip switches to compensate for zeroing errors
caused by environmental changes such as temperature, humidity, and etc.
•
Electrical noise rejection filter can be enabled when situation required.
•
Plug-in connectors for easy wiring and installation.
•
Standard DIN Rail mount simplifies systems integration.
•
Modular with common bus design allows future upgrade and expansion.