Introduction
Thank you for your selecting our radar level sensor.
This Manual includes detailed explanations regarding safety cautions, structure, set up,
operation, troubleshooting, and maintenance of the radar level sensor.
Read this manual carefully before operation to ensure an adequate understanding of the
equipment.
Proper use of the Operation Manual
The following points must be observed:
CAUTION
1. Carefully read the Manual. The contents of this Manual are very important and should
be read completely.
2. Store the Manual in a safe location. The Manual is essential for appropriate operation
of the equipment. Store the manual in a safe and accessible location. The storage
location and person in charge should be determined after careful consideration.
3. Ensure that the Manual is supplied to the operator of the equipment. The
representative or dealer of this equipment must provide this Manual to the user who
will actually operate the equipment.
4. The Manual must be replaced if lost or damaged. If the Manual is lost, contact the
representative. A new manual is available for purchase.
5. Ensure that the warning label is properly attached. If the warning label is illegible or
has come off, contact the manufacturer to purchase a new label.
Precautions regarding the Manual
This Manual was written in accordance with the standard specifications of the original
instrument.
In case of discrepancies between written specifications and approved drawings, the
drawings should be given precedence.
Restrictions and precautions necessary to maintain the equipment
The following items must be observed in order to maintain the equipment.
CAUTION
1. Do not drop or bump the unit and the transducer.
2. Do not use the unit in environmental conditions (ambient temperature, ambient
humidity) other than those prescribed in this manual.
3. Do not use the unit with a power supply other than the one prescribed in this manual.
4. Do not use damaged or worn-out cables (power cables, coaxial cables, signal
cables).
5. Under no circumstances attempt to modify or disassemble the instrument. Contact
the manufacturer in the event of a malfunction.
6. Do not remove cable glands or any screws that attached with main unit. In case of
removal it, main unit can not satisfy performance of protection class.
7. Do not modify or disassemble the unit. Such actions may result in electrical shock or
equipment damage.
8. Do not use the unit and/or accessories in restricted hazardous areas.
( )
3
