[7--] Other
[7-1] Re-search
Parameter
Value
Description
SET
Research
Mandatory surface echo re-search
[7-2] Parameters Reset
Parameter
Value
Description
SET
Initialization
Initialized by “1” setting
[7-3] Hardware Reset
Parameter
Value
Description
SET
Reset
Setting “1” executes hardware reset
[7-4] Self-check
Parameter
Value
Description
SET
Self-check
Execute self-check.
Check parameters are as follows,
- ROM
- EEPROM
- Volume table
- Noise table
- Transmitting gain
In case of RED lamp turns on the “Volume Table” or “Noise
Table”, please check setting parameters again. Any
contradictions may be happened.
In case of RED lamp turns on the “ROM”, “EEPROM” or
“Transmitter”, it might be caused by any breakdown on the
circuit. Please contact with the nearest dealership.
4- 22
