Micro Tracklight Series 24 VDC
T O K I S TA R L I G H T I N G
I N S T R U C T I O N M A N U A L
TOKISTAR
®
LIGHTING
1015 E. Discovery Lane
Anaheim, CA 92801
TEL: 714 772 7005 FAX: 714 772 7014
email: [email protected] Website: tokistar.com
PRECAUTIONS
1. Read all instructions completely before beginning installation.
2. Turn off electricity before beginning installation.
3. All wiring is to be performed by a qualified electrician.
4. Installation must comply with the National Electrical Code, and all applicable codes.
5. Turn main supply to the Power Supply on only after all connections have been made and tested.
6. Use only LED Drivers provided by Tokistar with the system.
General Description
Tokistar’s Micro Tracklight Series operates at 24 VDC from
Class 2 Power Supplies. LED Modules with pivoting heads can
be positioned at any location on the track. Each LED module
consumes 1.6 watts. Each fixture is labeled with load and oper-
ating voltage.
Version 1.2
Step 1:
Measure and cut the track to size.
Step 2: Determine position of LED Modules on track.
LED Modules can be removed
and repositioned on the track
by pressing buttons on the sides.
Firmly re-insert modules in
the track.
LED Module contact direction
Right
Wrong
contact
Contacts must face in the
direction of the feed connector.
Feed Connector
Tabs
LED Module
Track
Tabs must securely snap in
place under lip of Track.
Tabs
Button
Inserting LED Modules
Pivoting Head
LED Module
Track
Spacer
Button
