68
SERVICING YOUR OUTBOARD MOTOR
Spark Plug Service
RECOMMENDED SPARK PLUG:
IZFR6K-11E (NGK)
Incorrect spark plugs can cause
engine damage.
This outboard motor uses spark plugs
that have an iridium coated center
electrode. Be sure to observe the
following when servicing the spark
plugs.
• Do not clean the spark plugs. If an
electrode is contaminated with
accumulated objects or dirt,
replace the spark plug with a new
one.
• Use only a ‘‘wire-type feeler
gauge’’ to check the spark plug gap
if necessary. To prevent damaging
the iridium coating of the center
electrode, never use a ‘‘leaf-type
feeler gauge.’’
• Do not adjust the spark plug gap.
If the gap is out of specification,
replace the spark plug with a new
one.
1. Disconnect the battery negative (–)
terminal.
2. Unlock and remove the engine
3. Remove the 6 × 22 mm flange bolt
and remove the plug maintenance
cover.
PLUG MAINTENANCE
COVER
6
×
22 mm
FLANGE
BOLT
31ZY2T000.book 68 ページ ２０１３年１０月１６日 水曜日 午前１１時４０分
Summary of Contents for BFT200A
Page 124: ...122 MEMO 31ZY2T000 book 122...
Page 125: ...123 MEMO 31ZY2T000 book 123...
Page 126: ...124 MEMO 31ZY2T000 book 124...
