12
bigger picture
of bottom
3)
This product can be powered by 4 pcs AA size(1.5V) batteries(not included) or AC adapter which
required Voltage:5-6V output and 350-600mA electric current.
a
）
Install batteries as below pictures show. Use a screwdriver to take screw out of the battery cover, and
take the battery cover out. Put batteries into the battery jar according to the correct polarity, then put the
battery cover back and fasten it. Use the same way to take out battery
.
1
2
3
1.put negative side of
battery into the side of
battery jar with spring.
1. put positive side of
battery into the side of
battery with + mark.
1. adjust battery to
flat position
4. close battery cover,
inlay the two head
screw tightly.
WARNING
：
1) Non-rechargeable batteries are not to be recharged;
2) Rechargeable battery can only be charged under adult supervision;
3) Rechargeable battery should be taken out of the toys before charging;
4) Different types of batteries or old and new batteries cannot be mixed;
5) The batteries should be placed in the correct polarity;
6) Exhausted batteries are to be removed from the infant swing;
7) Power supply terminal must not short-circuit;
