22.Write protection
>This function can be used to protect individual recordings of all saved
recordings from accidental deletion.
>Select "Write-protect current file" to protect the currently selected
recording from accidental deletion.
>Select "Write-protect all files" to protect all saved recordings from
accidental deletion.
>Select "Unlock current file" to remove the write protection for the
currently selected recording.
>Select "Unlock all files" to remove the write protection for all saved
recordings.
6. ENTERING LIVE MODE
6.1 Adjusting And Installing The Camera
The SETUP mode is advantageous for determining the best possible
detection angle and range of the movement sensor. For this purpose,
attach the camera at approx. 1 -2m height to a tree and align the camera
with a desired direction.
Move slowly from one side of the observed area
to the other. Move parallel to the camera. Try out
different angles and distances.The green LED
flashing indicated that you were detected by side
PIR sensor.And the blue LED flashing indicated
that you were detected by main PIR sensor.
NOTE
：
green LED only lights up when “Side motion
sensor” is ON. In this way you can determine the
best position for aligning the camera.The
blue/green LED only flash in the SETUP mode as
soon as the PIR sensor has detected movement.
EN
14
