WORKING PRINCIPLE
SAFE-PARK EPS
®
is a unique parking aid enabling
close-to-bumper manoeuvring.
By its antenna-sensor,
which covers the whole bumper,
EPS
®
emits electromagnetic waves
of low intensity - thus generating
all around this bumper an unbroken
(electrostatic) zone of protection.
As long as the distance
between antenna and obstacle
is just decreasing,
EPS
®
signalizes by its 3-grade
warning sequence such obstacles,
which enter into this unbroken zone
and absorb its field energy.
BEFORE USE, READ AND OBSERVE ALL INSTRUCTIONS
02 1728
European Type-Approval
by German Kraftfahrt-Bundesamt
e1
SAFE-PARK E.P.S.
®
manoeuvring- and parking-aid
with antenna-sensor inside a
PVC bumper-protection strip
signalizes actively
approach of or to obstacles,
from 50 cm distance up to the bumper's brim,
with 3-grade acoustical warning-sequence,
and with RISK-ALARM in case of too high speed
and
protects passively
by the PVC-bumper-strip
USER AND INSTALLATION MANUAL
EASY AND FAST FITTING
Electrically, just connect EPS
®
to a switchable
power supply of the vehicle. (In case of back-
bumper: to the reversing lamp. In case of front
bumper: by a luminous switch to ignition-plus.)
AND FITTING-COMPONENTS
•
Central unit
:(A): To be fixed inside the car in
a dry place, close to the antenna connection.
•
Loudspeaker
(B): Ø 25mm, in driver's cab.
•
Antenna
, here included in the
self-adhesive
bumper protection strip
(C), 2.5m long, with
welded antenna-wire (D) and 2 terminals (E):
To be fitted on the plastic bumper, finally
covering
the
car's
whole
width and its corners.
••
Antenna-flex (F). Wiring (G). Mastic (H).
Pinch-connector (K). Flat-connectors (I).
NOTE:
In case of PVC strip alone the
components supplied
are (C), (D), and (E):
