Toa VP-2241, Instruction Manual

Page: 199 / 328

Chapter 8: INSTALLATION AND SETTING PROCEDURES (HARDWARE)
2. VX-2000, VX-200Xr, VX-200XI, AND EV-200
8-21
[VX-200XI]
Setting DIP Switch
SW1
2.6. Setting the VX-200XI Audio Input Module DIP Switch
Input sensitivity (mIc: –70 dB* or lINE: –20 dB*) and phantom power ON/Off settings can be performed using
the DIP switch on the VX-200XI circuit board.
[DIP Switch Setting]
Input sensitivity: lINE ( –20 dB*)
Phantom power: Off
Off Off
* 0 dB = 1 V
Notes
• Set the phantom power to OFF when the input sensitivity is set to LINE.
• Input sensitivity is factory-preset to LINE and the phantom power is preset to OFF.
Switch No.
Setting Item
1
Phantom Power
2
Input Sensitivity
Switch Position
1 2
ON
Input sensitivity: mIc (–70 dB*)
Phantom power: Off
Off ON
1 2
ON
Input sensitivity: mIc (–70 dB*)
Phantom power: ON
ON ON
1 2
ON