manualshive.com logo in svg

Toa VP-2241, Instruction Manual

Share
Download
Toa VP-2241 Instruction Manual Download Page 167

Chapter 7:  PC SOFTWARE OFFLINE SETTINGS

10. AcTIVATION SETTING mODE

7-52

10. ACTIVATION SETTING MODE

Select [Edit 

 Activation Setting mode] from the menu. 

clicking on the 

 button in the toolbar also enables the activation setting 

mode. 

Here, functions can be assigned to the remote microphone function keys, 
and the control input and internal timer set.

10.1. Remote Microphone Function Key Assignment 

remote microphone function keys can be assigned various functions other than simply recalling patterns created 
in the Emergency Broadcast, Pattern, and failure Output Pattern Settings.

 

Step 1. 

click the right mouse button over the corresponding remote microphone icon, and the following pop-
up menu will be displayed.

Continued on next page

Summary of Contents for VP-2241









































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands