manualshive.com logo in svg

Toa TS-D1000 Series, Instruction Manual, Page: 33 / 44

Share
Download
Toa TS-D1000 Series Instruction Manual Download Page 33

33

11.3.  Mic Auto-Off Setting

Even if a speaker forgets to turn off the microphone after speaking, if more than 30 seconds of silence is 

detected, this function automatically assumes that speaking has ended and turns off the microphone. 

                             

Mic auto-off setting key

Mic auto-off indicator

 

Notes

•  When the Mic auto-off function is enabled, if more than 30 seconds of silence is detected, the microphone 

will automatically turn off, even if during speaking. For conferences in which such long pauses are expected, 

set this function to Disabled.

•  This function may not work correctly in high-noise locations.

Tips

•  The Mic auto-off function is only operable while the Delegate unit is being used for speaking.

•  Setting the conference mode to "Voice activation" or "Chairman only" disables the Mic auto-off function, 

which causes the Mic auto-off indicator to extinguish.

11.3.1.  Enabling the Mic auto-off function

 Step  Press the Mic auto-off setting key when the Mic auto-off indicator is off. 

The Mic auto-off indicator lights, enabling the function. 

 

OFF

ON

11.3.2.  Disabling the Mic auto-off function

 Step  Press the Mic auto-off setting key when the Mic auto-off indicator is on. 

The Mic auto-off indicator extinguishes, disabling the function. 

 

OFF

ON

Summary of Contents for TS-D1000 Series













































Reviews:

No comments