Toa NX-300 Installation Setup Manual Download Page 77

Page: 77 / 183

Chapter 3

SYSTEM SETTINGS (NX-300 SETTING SOFTWARE)

11.4.5. Control pattern setting items

1. No.

Select the control pattern number.

2. Pattern name

Set the control pattern name (up to 31 characters).

3. Priority

Set the priority le el of the control pattern. 1 mergency, igh to o

4. Broadcast pattern

The list of broadcast patterns set on the broadcast pattern setting screen is displayed.
Mark the checkbox of the broadcast pattern to use.

[Bandwidth]

Displays the bandwidth to be used for the selected broadcast pattern.

Note

hen a broadcast pattern that uses an audio le is included in the selected broadcast pattern, the

bandwidth is not displayed.

5. Contact bridge pattern

Select from the contact bridge patterns set on the contact bridge pattern setting screen.

Summary of Contents for NX-300
























































































































































































Search results

Summary of Contents for NX-300

Reviews:

Related manuals for NX-300

Brands by name

Popular brands

Toa NX-300, Installation Setup Manual

Search results

Summary of Contents for NX-300

Reviews:

Related manuals for NX-300

Brands by name

Popular brands