Toa NX-300, Installation Setup Manual

Page: 66 / 183

Chapter 3
SYSTEM SETTINGS (NX-300 SETTING SOFTWARE)
3-
11.2.5. Broadcast pattern setting items
1. No.
Select the broadcast pattern number.
2. Pattern name
Enter the broadcast pattern name (up to 31 characters).
3. Direction
Select the direction in which broadcasts are to be made.
Transmission:
Transmits broadcasts from an operated unit to another unit.
Reception: Allows the operated unit to receive broadcasts from another unit.
Local: Makes broadcasts from the operated unit’s audio input to its audio output.
4. Audio input
Select the channel to be used as the input N1, N , or Audio le.
Note
Audio Files cannot be selected when Direction (3) is set to "Reception."
[Audio file selection button] Only hen the Audio input is set to Audio le
The audio le can be selected.
[Number of times] Only hen the Audio input is set to Audio le
Set the number of times that the audio le ill be reproduced in a single broadcast. 1 10, n nity
Step 1. lick on the Audio le selection button.
The Audio le selection dialog is displayed.
3
2
-2
2
-1