Toa NX-300, Installation Setup Manual

Page: 62 / 183

Chapter 3
SYSTEM SETTINGS (NX-300 SETTING SOFTWARE)
3- 0
11.2. Broadcast Pattern Settings
The broadcast pattern represents a combination of broadcasting direction and connection destinations which
are set in units that make broadcasts activated from the NX-300 Operation Software.
The Broadcast pattern can be set for local broadcasts that do not use a network or a combination that allows
single stream broadcasts. (Reception connection destinations: 1 location; unicast transmission connection
destinations 1 locations multicast transmission connection destinations locations
The number of connected destinations may drop belo 1 depending on audio speci cation settings.
For details, see
p. 6-8, "Maximum Number of Broadcasting Destinations."
11.2.1. Broadcast pattern setting screen
Clicking on the Broadcast pattern button displays the broadcast pattern setting screen.
Click
1. Broadcast pattern list
The list of all registered broadcast patterns is displayed.
p to 0 patterns can be set per unit.
2. Add Broadcast pattern button
sed to add ne broadcast patterns.
3. Delete Broadcast pattern button
sed to delete registered broadcast patterns.
4. Editing Field
Sets broadcast pattern contents.