Toa NX-300, Installation Setup Manual

Page: 170 / 183

6-8
Chapter 6
APPENDIX
1.6. Maximum Number of Broadcasting Destinations
The maximum number of broadcasting destinations per channel is as follo s
Model Multicast Unicast
NX-300
64
4
xample
In the case of multicast, the NX-300 can simultaneously broadcast to up to 64 locations each for both Channel
and hannel .
The maximum number of broadcast destinations could be reduced to or less as sho n belo depending
on audio specification settings.
f the number of broadcasts activated from each channel exceeds the above limit the priority control function
is automatically enabled as described belo disabling broadcasts that exceed the maximum limit
When another broadcast with a priority higher than that of the current broadcast is made, the broadcast with
the lower priority is interrupted, allowing the last high-priority broadcast to go through.
hen another broadcast ith the same priority level as that of the current broadcast is made if mode is
selected in the Same Priority Broadcast settings, the current broadcast is interrupted and the last broadcast
is output. ll subse uent broadcasts are disabled if is selected in the settings.
Tips
Use the NX-300 Setting Software to perform the Same Priority Broadcast settings. ( See p. 3-35, "Broadcast
Spec Settings." )
n the case of systems in hich and units are mixed the
s
ame priority broadcast setting is
fixed at .
Thansmission
ampling
8 32 48
Audio compression
ON ON ON ON
Transmission
Packet size
byte
8 4
4 4
32 4 4 4
64 4 4 4 4
4 4 4
256 4 4
4