Toa NX-300 Installation Setup Manual Download Page 139

Page: 139 / 183

Chapter 4

SETTINGS AND MANAGEMENT BY BROWSER

7.6. Clock Setting

Clock setting can be synchronized with the PC’s date and time.

Tip

The unit’s current time is displayed in the clock Setting field.

Step 1.

lick the lock etrie e button.

The PC’s current date and time are acquired.

Step 2.

Click the Setting button.
The unit’s clock is updated to the acquired time.

7.7. Reflecting Changed Settings (Unit Restart)

licking the nit estart button restarts the unit. e sure to restart any time the setting contents are changed.

Step: Click the Unit Restart button.

The unit restarts, re ecting the contents changed after it as started.

Notes

• Ne er restart the unit or unplug the po er supply cord during updates, or hile the busy indicator

on the front panel of the this unit is ashing.

• roadcasts are interrupted hen the unit is restarted.

Summary of Contents for NX-300
























































































































































































Search results

Summary of Contents for NX-300

Reviews:

Related manuals for NX-300

Brands by name

Popular brands

Toa NX-300, Installation Setup Manual

Search results

Summary of Contents for NX-300

Reviews:

Related manuals for NX-300

Brands by name

Popular brands