Toa NX-300 Installation Setup Manual Download Page 138

Page: 138 / 183

Chapter 4

SETTINGS AND MANAGEMENT BY BROWSER

4-26

7.5. Updating Firmware

Firmware is updated.

Step 1.

Click the Browse button.
The file selection dialog opens.

Step 2.

Select the NX-300 Firmware (extension: bin) and click the Open button.
The selected firmware’s file name is displayed.

Step 3.

lick the irm are pdate button.
pdate of the irm are commences.

Note

Ne er restart the unit or unplug the po er supply cord during updates, or hile the busy indicator on
the front panel of the this unit is ashing.

Tip

The latest ersions of the NX-300 rm are and instruction manuals NX-300 nstallation Setup anual

and NX-300 Operation Manual) can be found on the TOA Product Data Download site (http://www.
toa-products.com/international/).

Access the do nload site to do nload and use the latest ersion.

Summary of Contents for NX-300
























































































































































































Search results

Summary of Contents for NX-300

Reviews:

Related manuals for NX-300

Brands by name

Popular brands

Toa NX-300, Installation Setup Manual

Search results

Summary of Contents for NX-300

Reviews:

Related manuals for NX-300

Brands by name

Popular brands