Toa NX-300 Installation Setup Manual Download Page 133

Page: 133 / 183

Chapter 4

SETTINGS AND MANAGEMENT BY BROWSER

4-21

7.1. System Names and Passwords Change

System names and passwords can be changed.

Step 1.

Enter the new system name in the System Name frame.

Note

The symbols \, /, :, *, ?, <>, |, and blank spaces cannot be used for the system name.

Tips

• The current system name is displayed.
• se 1 1 characters to enter the system name.

Step 2.

Enter the changed password in the New Password field using 1 − 15 characters.

Step 3.

For confirmation, enter the changed password entered in

Step 2

in the New Password (Verification)

field.

nter the same pass ord again for eri cation.

Step 4.

lick the ser ata hange button.
pdates only the user data of the unit setting le.

Note

Ne er restart the unit or unplug the po er supply cord during updates.

Summary of Contents for NX-300
























































































































































































Search results

Summary of Contents for NX-300

Reviews:

Related manuals for NX-300

Brands by name

Popular brands

Toa NX-300, Installation Setup Manual

Search results

Summary of Contents for NX-300

Reviews:

Related manuals for NX-300

Brands by name

Popular brands