Toa NX-300, Installation Setup Manual

Page: 132 / 183

Chapter 4
SETTINGS AND MANAGEMENT BY BROWSER
4-20
[User Data]
3. System Name
hange the system name using 1 1 characters.
Note
The symbols \, /, :, *, ?, <> |, and blank spaces cannot be used for the system name.
4. New Password
Changes a password. Set the new password using 1 − 15 characters.
5. User Data Change
pdates the changed system name and pass ord.
[System Management Utility]
6. Setting File Upload
ploads backed up unit setting les.
7. Setting File Download
Backs up the unit setting file to a PC.
8. Delete All Settings
Deletes all settings to return them to their original settings when supplied.
The unit is factory-preset as follows:
IP Address:
192.168.1.1
nit Name NX-300
System Name: NX-300
Password:
guest
Note
To ie other settings, use the bro ser or connect ith the NX-300 Setting Soft are.
9. Firmware Update
pdates rm are.
10. Clock Setting
Set the NX-300 unit’s clock.
11. Unit Restart
Click the Restart button to restart the unit. Be sure to restart any time the setting contents are changed.
The change is only enabled after restart.
Notes
• Ne er restart the unit during updates of setting les or program.
• roadcasts are interrupted hen the unit is restarted.