Toa NX-300, Installation Setup Manual

Page: 117 / 183

Chapter 4
SETTINGS AND MANAGEMENT BY BROWSER
4-5
1. IP Address
Enter the connected NX-300 unit’s IP address.
(Default: 192.168.1.1)
2. Subnet Mask
Set the subnet mask. (Default: 255.255.255.0)
3. Default Gateway
Set this gateway if using unit outside the assigned subnet. (Default: 0.0.0.0)
4. Port No.
[TCP Port No. Assignment]
eb ser er nter the eb ser er port number 1 3 . efault 0
T data nter the T ser er data port number. efault 0
T control nter the T ser er control port number. efault 1
Inter-unit control: Enter the control port number between NX-300 units. (Default: 35285)
Start port No. nter the rst number of the unit s T port other than the eb ser er, T and
inter-unit control). (Default: 5000)
Type and Port No.: A list of port types and numbers used for controlling NX-100/100S units and the
NX-300 Operation Software is displayed. The TCP ports are assigned as follows:
Type Port No. Default
Broadcast control TCP Start port No. + 0 5000
PC control TCP Start port No. + 1 5001
Contact bridge TCP Start port No. + 2 5002
4. NETWORK SETTING
lick Net ork Setting indication on the menu on the left of the screen.