Toa NX-300 Installation Setup Manual Download Page 116

Page: 116 / 183

Chapter 4

SETTINGS AND MANAGEMENT BY BROWSER

4-4

The setting menu screen is displayed once you ha e entered the correct user name and the pass ord.

Note

se the menu located on the left of the screen to display each setting screen. These screens ill not be

displayed properly using the bro ser s ack or or ard buttons.

3. MENU ITEMS

Network Setting (See

p. 4-5

)

Audio File Management (See

p. 4-7

)

og anagement See

p. 4-11

)

System Management (See

p. 4-19

)

Change the connected NX-300 unit’s IP address,
subnet mask and default gateway.

Audio files stored in the connected NX-300 unit are
displayed. Audio files can also be added or deleted.

Operation logs and stream logs can be browsed

and sa ed, and the current operating status can

also be browsed.

Change passwords or upload and download unit
setting files.

Note

The system management menu is used for the
maintenance of the NX-300 unit for which system

and function settings ha e been completed using

the software.

Summary of Contents for NX-300
























































































































































































Search results

Summary of Contents for NX-300

Reviews:

Related manuals for NX-300

Brands by name

Popular brands

Toa NX-300, Installation Setup Manual

Search results

Summary of Contents for NX-300

Reviews:

Related manuals for NX-300

Brands by name

Popular brands