Toa NX-300, Installation Setup Manual

Page: 11 / 183

Chapter 1
SYSTEM SUMMARY
1-
(1) Unit Installation and Connection
See hapter , NSTA AT ON AN ONN T ON.
(2) Software Installation
nstall the NX-300 Setting Soft are, the NX-300 inder, and the NX-300 Operation Soft are in the .
• The NX-300 Setting Soft are can perform settings for multiple NX-300 units connected to the same
net ork.
• The NX-300 inder is used to detect NX-300 units on a net ork and change net ork settings.
• The NX-300 Operation Soft are enables the
to remotely operate the NX-300 to make broadcasts.
Note
See p. 3-3, SO T A NSTA AT ON, for the installation procedure.
(4) Operation-Related Settings
The NX-300 Operation rogram is re uired to make broadcasts from the . The NX-300 Operation
Soft are performs settings using the setting data prepared in System Setting 3 abo e.
Note
See hapter , S TT N S N SSA N S N T NX-300 O AT ON SO T A ,
for the setting procedure.
(3) System Setting
To perform settings, use the NX-300 Setting Soft are and NX-300 inder.
The entire system can be set and managed ith the NX-300 Setting Soft are by automatically
detecting any NX-300 units connected to a local net ork using the NX-300 inder.
Note
See hapter 3, S ST S TT N S NX-300 S TT N SO T A , for the setting procedure.
4. SETTING TASK FLOWS