5
6. INSTALLATION
The door station is designed to be mounted into the wall in conjunction with the YC-400 Wall recessed 4 size
back box. For mounting, follow the procedure below.
98.2 (3.87")
58.1
(2.29")
187 (7.36")
120 (4.72")
210 (8.27")
YC-400
Door station
Star head screw M4 x 16
(supplied with the door station)
Wall
Step 1. Remove a knockout hole in the YC-400.
Before mounting the YC-400 into the wall, punch out the knockout hole with a screwdriver or other tool
to make a cable entry hole.
Step 2. Make a mounting hole in the wall such as a gypsum board, then mount the YC-400 into the wall.
Tip
Install the YC-400 at the appropriate height from the floor (approx. 1.5 m or 5 ft).
[YC-400 dimensional drawing]
[Front]
[Side]
Unit: mm (in)
Unit: mm (in)
[Door station dimensional drawing]
Note
The N-SP80VS1 and the N-SP80AS1 have
the same dimensions.
Step 3. Run the connection cable through the cable entry hole in the YC-400, then connect it to the door station.
Step 4. Secure the door station to the YC-400.
Use the screws supplied with the door station and the star head screwdriver.
