9
Compatible switching hubs: Switching hubs conforming to PoE (IEEE802.3af Class 3) specifications
From PoE switching hub
IP-A1PG
8. UNIT MOUNTING
It is recommended to install it as shown in the example blow.
[Putting on the desk]
It can be used on a desktop by attaching the accessory rubber foot
to the bottom of this unit.
[Mounting on the wall]
Prepare a commercially available L-shaped bracket, etc., and fix it with the accessory screws using
the four screw holes of this unit.
Rubber foot (accessory)
IP-A1PG
* Plate thickness: 1 to 3 mm (0.04" to 0.12")
Machine screw
M3 x 6 (accessory)
Machine screw
M3 x 6 (accessory)
Commercially available
L-shaped bracket, etc.*
Commercially available
L-shaped bracket, etc.*
IP-A1PG
IP-A1PG
Note
Use metal fittings of sufficient strength and install in a place
with sufficient strength.
9. CONNECTIONS
9.1. Network Connection
Connect the IP-A1PG to the PoE switching hub using a LAN cable (straight UTP or STP cable, both
rated at Category 5 or greater and fitted with RJ45 connectors).
Power is supplied by the PoE switching hub.
