15
12. INITIALIZATION OF SETTINGS
Follow the procedure below to return all IP speaker settings to their default:
Tip
When initialized with the Reset key, the IP speaker’s sound source files are left in “Media”, not
deleted. Initialization to factory defaults, including deletion of sound source files, should be
performed using the browser settings menu.
Reset key
2
1
Status indicator
3
Step 1. Connect he unit to the PoE switching hub using a LAN cable. The IP speaker will be started.
Step 2. Hold down the Reset key located on the top panel using a pointed tool. The IP speaker
automatically restarts and settings initialization begins.
Tip
Clicking on the Reset key causes the IP speaker to be restarted.
If pressure on the Reset key is released part way through the initialization process, only unit
restart will be performed, and the settings will not be initialized.
To click on the Reset key, use a tool that is thinner than ø1.5 mm (0.06") and longer than
5 mm (0.2").
Step 3. When the status indicator lights yellow, release the reset key.
When initialization is complete, the status indicator lights green and all settings will be
initialized to their default settings.
[Default Settings]
Username:
admin
Password:
guest
IP address:
192.168.14.1
Subnet mask: 255.255.255.0
Default gateway: 0.0.0.0