15
IP-A1AF (bottom)
LAN cable
Reset key
1
2
From PoE+/PoE
switching hub
Status indicator
IP-A1AF (front)
LINE/MIC IN
VOLUME SIGNAL
STATUS
11. INITIALIZATION OF SETTINGS
Follow the procedure below to return all unit settings to their default:
Tip
When initialized with the reset key, the unit’s sound source files are left in "Media," not deleted.
Initialization to factory defaults, including deletion of sound source files, should be performed using
the browser settings menu.
Step 1. Connect the speaker to the PoE+ or PoE switching hub using a LAN cable.
The speaker will be started.
Step 2. Hold down the reset key located on the bottom panel using a pointed tool.
The speaker automatically restarts and settings initialization begins.
Tip
Clicking on the reset key causes the unit to be restarted.
If pressure on the reset key is released part way through the initialization process, only unit
restart will be performed, and the settings will not be initialized.
To click on the reset key, use a tool that is thinner than ø1.5 mm (0.06") and longer than
5 mm (0.2").
Step 3. When the status indicator lights yellow, release the reset key.
When initialization is complete, the status indicator lights green and all settings will be
initialized to their default settings.
[Default Settings]
Username:
admin
Password:
guest
IP address:
192.168.14.1
Subnet mask: 255.255.255.0
Default gateway: 0.0.0.0
