Please follow the instructions in this manual to obtain the optimum results from this unit.
We also recommend that you keep this manual handy for future reference.
HY-0851ST
HY-0852ST
SPEAKER MOUNTING BRACKET
INSTRUCTION MANUAL
SAFETY PRECAUTIONS
•
Be sure to read the instructions in this section carefully
before use.
•
Make sure to observe the instructions in this manual as
the conventions of safety symbols and messages
regarded as very important precautions are included.
•
We also recommend you keep this instruction manual
handy for future reference.
Safety Symbol and Message Conventions
Safety symbols and messages described below are used
in this manual to prevent bodily injury and property
damage which could result from mishandling. Before
operating your product, read this manual first so you are
thoroughly aware of the potential safety hazards as well as
understand the safety symbols and messages.
WARNING
Indicates a potentially hazardous
situation which, if mishandled, could result in death or
serious personal injury.
•
Install the unit only in a location that can structurally
support the weight of the unit and the mounting bracket.
Doing otherwise may result in the speaker falling down
and causing personal injury and/or property damage.
•
Owing to the speaker's size and weight, be sure that at
least two persons are available to install the speaker.
Failure to do so could result in personal injury.
•
Be sure to follow these instructions closely when
installing the HY-0851ST or HY-0852ST bracket to
prevent falls of the bracket due to corrosion, etc., which
could result in personal injury.
·
Because the HY-0851ST and HY-0852ST cannot be
used alone, be sure they are installed in combination
with another specified bracket.
·
The HY-0801ST and HY-0852ST are designed for
indoor use only. Do not install outdoors.
•
Tighten each nut and bolt securely. Ensure that the HY-
0851ST and HY-0852ST have no loose joints after
installation to prevent accidents that could result in
personal injury.
•
Do not loosen an axial bolt to prevent accidents that
could result in personal injury. (For the axial bolt, refer to
the section "NOMENCLATURE".)
•
Do not hang down from the bracket, as the speaker
system and bracket could fall, resulting in personal
injury.
GENERAL DESCRIPTION
The HY-0851ST and HY-0852ST Speaker Mounting
Brackets are specially designed for mounting TOA's ES-
0851 Speaker System. Use these brackets in combination
with their optional speaker mounting brackets HY-B0801,
HY-C0801 or HY-W0801. The HY-0851ST bracket can be
used in combination with the optional speaker stand ST-32
as well.
SPECIFICATIONS
Note : The design and specifications are subject to change
without notice for improvement.
• Accessories
Hexagon bolt M8
(with spring washer and plain washer) ................ 4
Model Number
HY-0851ST
HY-0852ST
Finish
Rolled steel plate, paint, black, semi-mat
Weight
3.1 kg
3.4 kg
