Toa BG-115 Operating Instructions Manual Download Page 1

MIXER POWER AMPLIFIERS

BG-115

BG-130

OPERATING INSTRUCTIONS

Thank you for purchasing TOA's Mixer Power Amplifier. 
Please carefully follow the instructions in this manual to ensure long, trouble-free use of your equipment.

TABLE OF CONTENTS

1. IMPORTANT SAFETY INSTRUCTIONS

..... 2

2. SAFETY PRECAUTIONS

............................ 3

3. GENERAL DESCRIPTION 

.......................... 5

4. FEATURES 

.................................................. 5

5. NOMENCLATURE AND FUNCTIONS 

Front ............................................................. 6
Rear .............................................................. 7

6. INPUT CONNECTIONS 

............................... 8

7. OUTPUT CONNECTIONS 

........................... 8

8. MUTING FUNCTION

.................................... 9

9. MIC/TEL INPUT IMPEDANCE SELECTION

... 9

10. JUMPER WIRE SETTING 

........................... 9

11. OPERATION

.............................................. 10

12. RACK MOUNTING BRACKET ATTACHMENT

... 10

13. VOLUME SETTING 

................................... 11

14. VOLUME CONTROL COVER 

................... 11

15. DIMENSIONAL DIAGRAM 

........................ 11

16. SPECIFICATIONS 

..................................... 12

Optional products  ....................................... 12

This figure represents the BG-130.

Summary of Contents for BG-115













Reviews: