7
[Equalizer Settings]
Clicking the EQ button (see
) displays the equalizer screen.
Both speaker and AUX outputs allow equalizer settings on 5 points and PEQ (parametric equalizer) parameters
can be set on all of the 5 points. In addition, PEQ or HPF (high-pass filter) settings can be performed on the
leftmost point, and PEQ or LPF (low-pass filter) settings can be performed on the ringhtmost point.
(Example: Speaker Output Equalizer Screen)
(1) Back icon
Clicking this icon returns the screen to the Mixer Screen.
(2) EQ curve display section
EQ curves are displayed depending on parameter settings.
(3) PEQ/HPF setting section
Used to set PEQ or HPF parameters.
Name
Description
A PEQ/HPF selection
Select the parameter type (PEQ or HPF).
Initial setting as follows:
Speaker output: HPF
AUX output:
PEQ
B Parameter settings
Set parameters for Freq (frequency), Gain and Q.
The setting range and initial settings are shown in the table below.
Note: Gain and Q cannot be set if HPF is selected in the PEQ/HPF selection.
[Setting Ranges and Initial Settings]
Setting Item Setting Contents
Setting Range
Initial Setting
Speaker Output AUX Output
PEQ
Freq (Hz)
20 to 20000
300
200
Gain (dB)
–15 to 15, 0.5 dB steps 0
0
Q
0.267 to 69.249
0.718
4.318
HPF
Freq (Hz)
20 to 20000
300
200
1
2
3
4
5
6
A
B
C
D
E
F
G
7