Press the MODE button and, while the MODE button is pressed,
press the AUTO button.
A beep will sound and the GPS and AUTO LED will be
illuminated.
The autopilot will lock on to course to steer as requested by the
GPS.
The course-to-steer is shown on the display.
The vessel will begin turning from its Heading to that requested
by the GPS unit, at a maximum rate of 10 degrees per second.
If no GPS data is received by the AP46, the autopilot will lock
onto the course of the vessel at the time that GPS Mode was
engaged, and the “NO GPS DATA” alarm will function.
Disengaging GPS Mode:
Pressing the AUTO button will return the AP46 to Manual Mode.
Setting up your GPS unit:
Because there are a great variety of GPS units that will work with
this autopilot, the following is a guide only. For more
information, consult your GPS manual.
TMQ AP46 Autopilot
Page 11 of 34
Ver1.0 07/03/2007
