Version-01
Cal.VK6 Series
(VK61A/64A)
5.To remove the winding stem
1) Set the winding stem to normal position.
2) Pull out the winding stem while pushing "A".
Push "A"
6.To remove or install the battery
1) Remove the hook of the switch spring's battery clamp.
2) Insert the battery sideways, and have the hook of the switch spring's battery clamp catch the
main plate.
Switch spring
Battery clamp
1) When Removing
Main plate
2) When Installing
7.Remarks on installing the battery
1) After the battery is replaced with a new one,
Tweezers
or after the battery is reinstalled following
the repairing procedures, be sure to touch
the AC terminal of circuit block and the
switch spring with conductive tweezers to
reset the circuit as illustrated.
TECHNICAL GUIDE
11
○
16
