TMI Products CogniSense TMI 1402A Quick Start Manual Download Page 1

 

  

                        

Web-Enabled Instrument Server

 

 

Telemonitor, Inc.

 TMI 

1402A 

 
 

9055F Guilford Road • Columbia, MD 21046 • (410)312-6664 • Fax (410)312-6692 • www.telemonitor.com

 

CogniSense is a registered trademark of Telemonitor, Inc.

 

Rev. 1.01    03/09/2007 

 

®

Web-Enabled Instrument Server 

Quick Start Guide 

 
Thank you for purchasing the TMI 1402A Web-Enabled Instrument Server, a development system based 
on IEEE Std 1451.2-1997 and provided by Telemonitor, Inc.  The following information will help you 
install and configure your development system. 

 
MINIMUM SYSTEM REQUIREMENTS 

 

Windows 95, Windows 98, Windows NT, Windows 2000, or Windows XP 

 

10 or 100 Base-T Network Interface Card running TCP/IP protocol 

 

Microsoft Internet Explorer (V 4.72.3110.0 or later) or Netscape Navigator (V 4.08 or later) 
Note:  The current versions are available from their respective manufacturers’ web sites. 

Internet Explorer: 

http://www.microsoft.com

 

Netscape Navigator: 

http://www.netscape.com

 

 

Adobe Acrobat Reader (V 3.02 or later) is required to view the documentation. 

 

ITEMS YOU WILL NEED FOR INSTALLATION AND ASSEMBLY 

 

An assigned IP Address, Subnet Mask, and Gateway for the NCAP. 
Please refer to Agilent’s HPIE Documentation for specific requirements, then contact your network 
administrator for an IP address. 

 
 

STEP 1:   

UNPACK THE PRODUCT 

Caution:  Your development system contains sensitive electronic devices.  Please observe ESD safety 
precautions to avoid damage to the components.   
 
Your development system contains the following components:

 

 

Agilent Technologies 66502 Rapid Prototyping Board  (the NCAP) 

 

TMI 1451.2-SC Prototyping STIM (the STIM) 

 

AC Power Adapter 

 

Software and Documentation CD 

 
If a component is missing or appears to have been damaged, please contact Telemonitor, Inc. at 
[email protected]

 
 

STEP 2:  

INSTALL THE DOCUMENTATION AND SOFTWARE 

Software and documentation for the NCAP and the STIM are available on the accompanying CD. The 
Telemonitor documentation and software is available on 

www.telemonitor.com

. Agilent no longer supports 

the NCAP, so please contact Telemonitor for all software or documentation. 
 

 

NCAP:  HPIE Documentation and Software 

 
HPIE stands for “Hewlett-Packard Industrial Ethernet.” The NCAP was developed before Agilent 
separated from HP. 
 
HPIE documents include “66502 Rapid Prototyping Board Getting Started” and the “Node User’s 
Software Guide”. 
 
HPIE software includes the HPIE Tools (a utility for configuring the NCAPs) and the TEDS 
editor. These should be installed by executing the setup program in their respective directories on 
the included CD. 
 

Reviews: