TMG A1-DBS, Instruction Manual

Page: 7 / 15

7
2.3. Safety precautions
Installation:
Before installing always read the technical data thoroughly (see chapter 6 Technical data)
Never install the valve with connected compressed air
With a connected airline there is a chance that the actuator will be activated
during installation and risk of injury.
During operation:
Never touch the valve or the pipes while processing hot liquids.
Never put your hands under or near the outlet during operation,
there is a risk of injury if the product consists of aggressive or hot liquid.
Never remove the air line during operation, if a loose airline is activated,
there is a risk of injury from a swishing line.
Performing maintenance:
Before starting maintenance, check that the valve with pipe lines are still hot.
Do not perform any maintenance on the hot valve.
Before starting , maintenance, disconnect compressed air line.
If present, disconnect wiring from status report.
Never pressurize the valve when servicing the valve.
Always apply the seals correctly and with care.
The warranty for TMG Holland products depends on the use of original TMG Holland
spare parts.
During transport:
Always ensure that all connections are removed before you remove the valve from
the installation.
Check the weight of the valve before removing it from the installation.
Always ensure that the valve is properly secured during transport if specially
designed packaging material is available, it must be used.
Residual fluid that flows out of valve and pipe lines can contain acid or lye.
Dispose of spilled liquid according to the rules.