11
5
Maintenance
5.1. General maintenance
Recommended spare parts: Maintenance kits (see 6 Technical data)
Order service kits from the service kits section (see 6 Technical data)
Ordering spare parts: Contact the Sales Department.
The Actuator is Spring Loaded,
for disassembly it is necessary
to use a Spring Tensioner.
5.2. Disassembly Cone with Bellows
The Actuator with the Cone and Bellows (CBS) can be disassembled
in the field without disassembling the valve body.
Make sure the air system is turned off.
Remove the air hose from the Actuator.
Remove the Try-clamp
Carefully lift the actuator with CBS.
Be careful not to damage O-ring and Bellows.
Place the Actuator with CBS in a dust-free place
on the workbench in a vice as shown.
Use soft blocks in the vise
to avoid damaging the Cone
Use wrench 19 for disassembly the CBS
and use little compressed air on P1
Follow the CBS assembly guidelines in reverse order
for proper disassembly (chapter 4.3)
Work carefully, the CBS must be
without tension at all times.
Summary of Contents for A1-DBS
Page 1: ...1 Instruction manual AR MA 002 E01...
Page 5: ...5 1 2 Coding of Valves...
