Wireless NVR Kit Manual
36
3, Select motion for the type of detection, check to turning on the checking box.
4, Set the motion detection sensitivity.
5, Select the alarm duration, check the motion detection processing method, select the arming time and
alarm area
6, Click the "Apply" button to save the setup.
Explanation
Sensitivity selection has five grades: highest, higher, moderate, lower, lowest. The higher the sensitivity,
the moving objects are more likely to be detected.
Mobile detection processing methods are alarm, buzzer, E-Mail notification, mobile phone APP alarm.
If choosing the alarm for the motion detection processing mode , you need to select the work mode as
"normally open" in the video setup -> alarm setup.
Check the mobile phone APP alarm, you can send motion detection alarm information to the phone
E-see net cloud client.
4.9.2 Video loss alarm
Function explanation
：
If you lose the video signal of a channel, you can find the phenomenon in time and
deal with.
Steps
：
1, Right click the main interface, select "System Setup" in the shortcut menu, enter the "System Setup"
interface.
2, Select Channel Setup -> Video Detection.
3, Select "Video Loss" as Detection Type. As shown below
：
