172-65702M-04 (SQ-C01) 10 Dec 2020
8
Precautions for Moving the Package
Observe the following precautions when removing the unit from the box to transport.
In the event of failure to observe precautions, TLV is not liable for damage of the unit
or injury.
The weight of the unit when empty is approximately 21 kg. If it is difficult
for one person to carry or install the product, work with two or more
people and use a lifting device so that work can be performed safely.
Failure to do so may result in back strain or other injury if the object
should fall.
CAUTION
Follow the procedures below for moving the unit.
Moving procedures
1) Remove all items from the packaging except the unit.
2) Remove the unit from the box, then before moving the
unit, remove the cover. Loosen the screws fixing the
cover to the base. The screws are located at the center
of the top and bottom of the cover.
3) When moving the unit, make sure to hold the base or
the handles on the base as shown below. Do not hold
the unit by the cover, as the unit may fall, resulting in
damage or injury. Do not hold the unit by the piping, as
internal equipment may be damaged and pipe joints
may be loosened, resulting in water or steam leakage
when fluid is supplied.
