background image

 

 

172-65456MA-04 (JH7RM-P)  14 Jul 2015 

1

 

Contents

 

Introduction ....................................................................... 1

 

Safety Considerations ....................................................... 2

 

Checking the Piping .......................................................... 4

 

Operation .......................................................................... 5

 

Specifications .................................................................... 6

 

Configuration ..................................................................... 6

 

Installation ......................................................................... 7

 

Maintenance ...................................................................... 8

 

Disassembly / Reassembly ............................................... 9

 

Instructions for Plug / Holder Disassembly and Reassembly  12

 

Troubleshooting .............................................................. 13

 

Product Warranty ............................................................ 14

 

Options ............................................................................ 15

 

Introduction 

Thank you for purchasing the 

  Free Float Steam Trap. 

This product has been thoroughly inspected before being shipped from the factory. 
When the product is delivered, before doing anything else, check the specifications 
and external appearance to make sure nothing is out of the ordinary. Also be sure to 
read this manual carefully before use and follow the instructions to be sure of using 
the product properly. 

This instruction manual is edited based on the JH-P Series (with cover plug). The JH-
W Series (with socket welded cover connection), JH-F Series (with flanged cover 
connection) and JH-V Series (with manual air vent valve) are described at the end of 
this manual in the 'Option’ section.  

This free float steam trap employs a hinge-less and lever-less free float to rapidly, 
automatically and continuously discharge the inflowing condensate that is 
continuously generated inside the equipment, thus preventing the accumulation of 
condensate and thereby improving the heat transfer efficiency of the equipment. 

This steam trap also employs a precision-ground float and three-point seating that 
supports the float securely at three points and ensures a high degree of sealing when 
even only minute quantities of condensate are present. 

This free float steam trap is suitable for applications with the introduction of almost no 
air (such as process systems and steam-using equipment under long continuous 
operation, or superheated and saturated steam mains, branches and trace lines). 

If detailed instructions for special order specifications or options not contained in this 
manual are required, please contact

 for full details. 

This instruction manual is intended for use with the model(s) listed on the front cover. 
It is necessary not only for installation but for subsequent maintenance, 
disassembly/reassembly and troubleshooting. Please keep it in a safe place for 
future reference. 

Summary of Contents for JH7RM-P



















Reviews: