Specifications
Caution
Install properly and DO NOT use this product outside the recommended operating
pressure, temperature and other specification ranges. Improper use may result in such
hazards as damage to the product or malfunctions that may lead to serious accidents. Local
regulations may restrict the use of this product to below the conditions quoted.
DO NOT use this product in excess of the maximum operating pressure differential. Such
use could make discharge impossible (blocked).
Use only under conditions in which no freeze-up will occur. Freezing may damage the
product, leading to fluid discharge, which may cause burns or other injury.
Refer to the indication on the body and cover for detailed specifications.
SS3-E/SS3-P/SS3-EP
Cover
Body
SS5-P/SS5-EP
A
Model
B
Nominal Diameter
C
Maximum Allowable Pressure (PMA)
01
D
Maximum Allowable Temperature (TMA)
01
E
Maximum Operating Pressure (PMO)
F
Maximum Operating Temperature (TMO)
G
Production Lot No.
H
Connection Standard
I
Connection Standard No.
J
CNo.
02
01
Maximum allowable pressure (PMA) and maximum allowable temperature (TMA) are PRESSURE
SHELL DESIGN CONDITIONS, NOT OPERATING CONDITIONS.
02
CNo. (Charge/Mill No.) is displayed for products with options. This item is omitted when there are no
options.
8
