850925 Signalmanager
TLS electronics GmbH Contact:
5
Panel Description
①
Mode DIP Switch -- 4 pin (UP=0, DOWN=1). The Signalmanager can be
configured to perform various tasks using the mode DIP switches. Detailed
settings please see below:
A. Under control by DIP switch, the position of
DIP Switch-0
should be UP
(0).
DIP Switch-3
-- Selectable to convert HDMI signal to output.
Position=0 (UP) -- Auto convert 6G (4:4:4) Format to 3G (4:2:0) when
detect sink not support 6G (4:4:4).
Position=1 (DOWN) -- Always convert 6G (4:4:4) format to 3G (4:2:0).
DIPSwitch-2
-- HDCP management.
Position=0 (UP) -- HDCP follow sink.
Position=1 (DOWN) -- HDCP follow source.
DIP Switch-1
-- Audio embedding and bypass.
Position=0 (UP) -- Audio bypass.
Position=1 (DOWN) -- Audio embedding (L/R input added to the HDMI
Output).
B. Under control by serial USB mode, the position of DIP Switch-0 should
be DOWN (1). DIP Switch-1/2/3 -- reserved or not in use.
