TL3500H
36W CFL FLOOD LIGHT INSTRUCTION
Read all instructions before proceeding w i t h installation.
We strongly recommend that this floodlight should be installed
by
a qualified electrician.
SPECIFICATONS:
Power Source: 220-240V AC
Loading:
36W
INSTRUCTIONS
1.
This Halogen Floodlight has three wires:
Brown-Live
Blue-Neutral
Connect these wires to 220-240 volt AC power source.
2. Refer to the following diagram for wiring connection using the terminal block
Connect to
TO
POWER
3.
Use the
wire to earth the fixture.
4.
Double check the connections afler wring as errors may damage the lamp or cause a fire hazard.
MOUNTING POSITION:
-The rear and two sides of the lamp should be a distance o f 50mm from the mounting surface
-
The distance between the front o f the glass and the illuminated surface must be
-
The place where the lamp
i s
mounted should be kept
dry
and clean.
LAMP
TUBE FITTING:
Unscrew the bolt and open the glass holder. Turn the pin slots of the tube holders on both ends vertically (see
figure.2); While the tube pins are in the tube holders on both ends, turn the tube at
(see figure.
3).
Close
the glass
with the bolt. The tube cannot be fitted with bare hands.
