TKO 7015-G2, Owner'S Manual

Page: 28 / 37

STEP 7
1. Attach four 4.5" Pulleys (#29) to the Weight Stack Frame ASSY (#1) using:
seven Φ11*Φ20*2 Flat Washer (#52)
three M10 Nylon Lock Nut (#55)
four M10*50 SHCS (#61)
2. Attach one 4.5" Pulleys (#29) to the Movable Pulley Frame (#20) using:
two Φ11*Φ20*2 Flat Washer (#52)
one M10 Nylon Lock Nut (#55)
one M10*50 SHCS (#61)
3. Attach one 4.5" Pulleys (#28) and one Pulley Covers (#26) and one Threaded Column
(#66) to the Main Frame ASSY (#11) using:
one Bushing Φ22 (#42)
one Φ11*Φ20*2 Flat Washer (#52)
one M10*25 SHCS (#59)
4. Attach one 4.5" Pulleys (#29) to the Swing Frame ASSY (#18) using:
two Φ11*Φ20*2 Flat Washer (#52)
one M10 Nylon Lock Nut (#55)
one M10*80 SHCS (#63)
5. Take down one M10 Nylon Lock Nut and one M10*35 SHCS from the Tension Cable
ASSY (#23), Attach the Tension Cable ASSY (#23) to the Top Plate (#4) and the
Weight Stack Frame ASSY (#1) using:
one M10 Nylon Lock Nut (Down off)
one M10*35 SHCS (Down off)
6. Attach the Cable ASSY (#24) to the Movable Pulley Frame (#20) and the Wheel Frame
ASSY (#14).
7. Attach one M4*15 FHCS (#46) to the Wheel Frame ASSY (#14).
Note: Wrench tighten bolts and Nylon Lock Nuts.
Assembly
28