4 General Recommendations
4.1 Receiving, Storage and Unpacking
1.
Upon receipt of goods at the site store, check all packaging for visible damage. Every damaged box
should be opened and its contents inspected for damage. If equipment is damaged, a claim form shall
be filled with the carrier immediately. It may then be necessary for the carrier to inspect the equipment.
2.
Store the light assembly preferably in its original packaging in a protected area. When stored unpacked,
please take care not to damage the cable insulation.
3.
Unpack the light assembly at the installation site to avoid damage during transportation and handling.
4.2 Electrical Connection
The light assemblies covered by this manual are designed for connection to 6.6 or 20-A series circuits via
one or two L-830 or L-831 series transformers. The current to the light should not exceed 6.6 A + 5%. The
series transformers are to be ordered separately.
4.3 Base Earthing
Whatever the chosen installation method, it is strongly recommended to earth the base, especially in
locations presenting a risk of lightning strikes. Failure to earth the base correctly will void the warranty for all
damages occurring as a result of voltage surges.
Installation and Maintenance Instructions - LED AGL Runway Guard Lights - type 921
©
TKH Airport Solutions 2022. All rights reserved.
13
