© TKH Security B.V.
BL950
5MP Network Bullet Camera
Quick Start Guide
Unpack
Installation Notices
Connectors
Connector Definition
Camera Cabling
Alarm I/O and RS-485 Connection
Find additional manuals, the
datasheet, the EU Declaration of
Conformity, and the latest firmware
for this product at:
tkhsecurity.com
CAUTION
INSTALLATION
SHALL
BE
PERFORMED
BY
QUALIFIED PERSONNEL ONLY. INSTALLATION SHALL BE IN
ACCORDANCE WITH LOCAL PROCEDURES. THE CAMERA
CONTAINS BATTERIES. DO NOT REPLACE IN RISK OF
EXPLOSION.
BATTERY REPLACEMENT SHALL NOT BE APPLIED IN VIEW
OF THE RISK OF EXPLOSION. LE REMPLACEMENT DES
PILES
NE
DOIT
PAS
ÊTRE
APPLIQUÉ
AU
RISQUE
D'EXPLOSION. DISPOSE OF USED BATTERIES ACCORDING
TO
THE
INSTRUCTIONS.
METTRE
AU
REBUT
LES
BATTERIES
USAGÉES
CONFORMÉMENT
AUX
INSTRUCTIONS..
FOR
“PoE” INPUT CONNECTION, USE ONLY WITH UL
LISTED I.T.E WITH
“PoE” OUTPUT. DESCRIPTION FOR THE
“PoE” IS INTENDED TO BE CONNECTED TO NOT EXPOSED
(OUTSIDE
PLANT)
NETWORKS
OR
EQUIVALENT
STATEMENT IN INSTALLAION INSTRUCTIONS.
POUR
LA
CONNEXION
DâÇÖENTREE
"PoE",
UTILISER
UNIQUEMENT AVEC UN I.T.E. LISTE AVEC UNE SORTIE
"PoE". LA DESCRIPTION DE "POE" EST CONÇUE POUR
ÊTRE CONNECTÉE À DES RÉSEAUX OR NON ÉNONCÉS
(INSTALLATIONS
EXTÉRIEURES),
DANS
LES
INSTRUCTIONS
D’INSTALLATION DE L’INSTALLATION.
Subject to modification. Actual product and accessories may differ in appearance.
BL950
No.
Connector
Definition
1
RJ45/PoE
Network and PoE connections. Contact TKH
Security for a compatible PoE injector.
2
Audio I/O
Two-way audio transmission.
3
BNC
For analogue video output
4
Alarm I/O
Alarm I/O connection. Do not connect external
power to the alarm I/O connector of the camera.
5
Power & RS-485
For DC12V/AC24V power connection
6
Reset Button
Press the button with a proper tool for at least 20
seconds to restore the system.
7
microSD Card Slot
Insert the microSD card into the card slot to store
videos and snapshots. Do not remove the
microSD card when the cam era is powered on.
See the diagram and the pin definition below for the
alarm I/O connection.
Figure 2 Diagram of Alarm I/O connection pins
Pin
Definition
Pin Definition
1
Alarm In 2+
4
Alarm Out1 -
2
Alarm In -
5
Alarm out1+
3
Alarm In1+
Table 3 Pin definitions
Table 1 Connector definition
❑
The green link LED is lit when there is a good network
connection.
❑
The orange network LED flashes to indicate that there
is network activity.
IN SOME CASES, AN ETHERNET CROSSOVER
CABLE MAY BE NEEDED WHEN CONNECTING
THE CAMERA DIRECTLY TO THE PC. CHECK THE
STATUS OF THE LINK INDICATOR AND THE
ACTIVITY INDICATOR LEDS. IF THE LEDS ARE
UNLIT, CHECK THE LAN CONNECTION.
Power Connector
Table 2 Pin definition
Pin
Definition
1
DC12V + / AC24V
2
DC12V - / AC24V
2021 | Vision 1 (20210601) | BL950 QSG
Figure 1 Camera Connectors
1
2
1
2
3
4
5
6
7
2-pin power terminal
block
Quick Start Guide
5-pin alarm
terminal block
Figure 2 Default button and microSD card slot
6
7
M5 security
screw(x1)
M4 Self-tapping screw
and screw anchors(x5)
Security Torx
