7.1.4
H.264 Profile
Users can set each H.264 profile to Baseline Profile, Main Profile, or High Profile according to
the compression needs. The default setting is Main Profile.
To set an H.264 profile
1
On the Streaming tab, click Video format in the menu on the left.
2
In the H.264-x list, select the desired profile.
Note: Make sure that the profile you select is supported by the system.
3
Click Save.
7.2
Video compression
Streaming > Video compression
Administrators can select the appropriate video compression mode for an application on the
Video compression page.
To change MJPEG compression settings
1
On the Streaming tab, click Video compression in the menu on the left.
2
Set a value for the MPEG Q factor parameter.
Range: [1...70]. Default setting: 35. Higher values give higher image quality. They
require higher bit rates, though, and therefore consume more bandwidth.
3
Click Save to confirm settings.
To change H.264 compression settings
1
On the Streaming tab, click Video compression in the menu on the left.
2
Set values for the bit rates for each H.264 video stream.
Video and audio streaming
73
