Up to 16 characters can be used.
7
In the Private key password text box, enter the password for your user identity.
Up to 16 characters can be used.
8
To enable IEEE 802.1X, select Enable IEEE 802.1x.
9
Click Save.
6.3
Network
From the Network pages, the administrator can configure IP address assignment and settings
for Quality of Service (QoS), the Simple Network Management Protocol (SNMP), and Universal
Plug and Play (UPnP).
6.3.1
Basic
System > Network > Basic
This page describes how to configure the camera to use a fixed IP address or acquire the
address dynamically through the Dynamic Host Configuration Protocol (DHCP). You can also
configure PPPoE support, Advanced network settings, and enable IPv6 support.
Note: When the IP address is changed, webpage communication is lost. Log on to the
webpage with the new address to re-establish the connection.
6.3.1.1
Obtain an IP address automatically
HSD820v2H3-E cameras are configured to use a fixed IP address by default. Administrators
can set the camera to obtain its IP address via the Dynamic Host Configuration Protocol
(DHCP).
System settings
35
