6.2.3
IP filter
System > Security > IP filter
Using the IP filter, you can deny/allow access to the IP camera from specific IP addresses. Up
to 256 IP addresses may be specified.
To enable the IP filter
1
On the System tab, click Security in the menu on the left.
2
In the Security submenu, click IP filter.
3
Select Enable IP filter.
4
To determine the IP filter behaviour, select Deny or Allow from the list.
5
Click Apply.
IP addresses listed under Filtered IP Addresses are now allowed/denied access to the
camera.
To add an IP address
1
Enter the IP address.
2
Click Add.
The address is added to the currently configured IP addresses.
Up to 256 IP addresses can be specified.
To delete an IP address
1
Select the IP address.
2
Click Delete.
The IP address is removed from the list.
System settings
33
